Answer:
Since water has a density of 1 gram per cubic centimeter, then the container would need to be 800 cubic centimeters. if this container were a perfect cube, then the length of the side of the container would be equal to the cube-root of 800, which is approximately 9.28 cm to a side, or 3.65 inches to aside.
A scientist wants to make a solution of tribasic sodium phosphate, Na3PO4, for a laboratory experiment. How many grams of Na3PO4 will be needed to produce 400. mL of a solution that has a concentration of Na ions of 1.00 M
Answer:
21.86 grams
Explanation:
It is important to note that for every mol of Na3PO4 there is, 3 mols of Na ions are produced.
Na+=1m(0.4l), so mols of Na3PO4= 0.4/3= 0.13333... mols
the molar mass of Na3PO4 is 163.94 grams/mol. 0.1333*163.94=21.86 grams of Na3PO4.
Find the volume of 0.160 M sulfuric acid necessary to react completely with 75.0 g sodium hydroxide.
The volume of 0.160 M sulfuric acid necessary to react completely with 75.0 g sodium hydroxide is 0.15L
The reaction of sulphuric acid and sodium hydroxide is expressed as:
[tex]2NaOH + H_2SO_4 ==> Na_2SO_4 + 2H_2O[/tex]
Determine the moles of NaOH present
Molar mass of NaOH = 23 + 16 + 1 = 40g/mole
Given that mass of NaOH is 75.0g
Mole of NaOH = 75/40 = 1.875moles
Determine the number of moles [tex]H_2SO_4[/tex] needed to react with 1.875 moles NaOH
Moles of [tex]H_2SO_4[/tex] = [tex]\frac{1.875}{2} = 0.9375moles of H_2SO_4[/tex]
Recall that volume = Molar mass * number of moles
Volume of [tex]H_2SO_4[/tex] = 0.160 * 0.9375
Volume of [tex]H_2SO_4[/tex] = 0.15L
Hence the volume of 0.160 M sulfuric acid necessary to react completely with 75.0 g sodium hydroxide is 0.15L
Learn more here: https://brainly.com/question/837939
HELP PLEASE I WILL GIVE BRAINLIEST PLEASE HELP ME
Explain the law of conservation of mass. Give an example of how mass is conserved using numbers to justify your answer.
Answer:
The law of conservation of mass states that matter cannot be created or destroyed in a chemical reaction.
For example, when wood burns, the mass of the soot, ashes, and gases equals the original mass of the charcoal and the oxygen when it first reacted. So the mass of the product equals the mass of the reactant.
Another example, solar panels don't create solar energy. They harness energy from the sun and transform it into another type of energy (electricity).
Determine the wavelength of a radio station transmitting a broadcast at 520 Megahertz.
The wavelength of the radio station broadcasting at 520 megahertz is 0.58m.
HOW TO CALCULATE WAVELENGTH:
The wavelength of a wave can be calculated by dividing the speed of the wave by its frequency as follows:λ = v/f
Where;
v= velocity of the wave (3 × 10⁸m/s)f = frequency (Hz)According to this question, a radio station is transmitting a broadcast at 520 Megahertz. The wavelength is calculated as follows:λ = 3 × 10⁸ ÷ 5.2 × 10⁸λ = 0.577 × 10⁸-⁸λ = 0.58mTherefore, wavelength of the radio station broadcasting at 520 megahertz is 0.58m.Learn more at: https://brainly.com/question/19601903?referrer=searchResults
help me. correct answer will be marked as brnlst
Answer:
You are correct it is NaCl
A city carrier resigns and trains as an office receptionist this is a person’s metabolism is likely to
How many total bonds (Total shared pairs) are in the lewis structure for HSiN and CO2?
Answer:
2
Explanation:
Hope it can help you lovelots
#LEARN WITH BRAINLY
A sample of carbon dioxide gas has a pressure of 8.33 bar and a volume of 10.3 mL at a temperature of 29.1 °C. How many
molecules of carbon dioxide gas are in the sample?
molecules:
Be sure to answer all parts. Select the anti periplanar geometry for the E2 reaction of (CH3)2CHCH2Br with base. mc2x mc2xd1 mc2xans mc2xd2 Then draw the product that results after elimination of HBr. draw structure ...
The anti periplanar geometry for the E2 reaction of (CH3)2CHCH2Br with base is shown in the image attached as well as the structure of the product formed in the reaction.
In organic chemistry, an antiperiplanar conformation is one in which the groups point up and down at a dihedral angle of 180° away from one another. In the image attached, the antiperiplanar conformation of (CH3)2CHCH2Br is shown.
Recall that an E2 reaction is a synchronous elimination reaction where to atoms leave at the same time. The product of this reaction is also shown in the image attached.
Learn more: https://brainly.com/question/2510654
According to VSEPR theory, a molecule with the general formula AX2E2 (A is the central atom, X is the bonded atom and E is a lone pair of electrons) has how many regions of electron density around the central atom [ Select ]
Answer:
see explanation
Explanation:
An AX₂E₂ geometry is derived from an AX₄ parent geometry and is based upon 4 regions of electron density about the central element and defines a tetrahedral geometry and the geometry is bent angular.
An example is the water molecule (H₂O) with two covalent O - H bonds and two free pair electrons on the central oxygen element.
20 points! Please Help!!
Based on what you have read what is the opportunity cost of the glass-making company's decision?
a higher quaity tem
a greater proft
a loss of equipment
a longer production time
Answer:
a greater profit......
name 2 elements that are liquid at room temperature and describe their colour
Answer:
Bromine
Mercury
Bromine (symbol Br and atomic number 35) is a reddish-brown liquid, with a melting point of 265.9 K. Mercury (symbol Hg and atomic number 80) is a toxic shiny silvery metal, with a melting point of 234.32 K.
8) What mass of chlorine reacts with 20.0 g of iron to form iron(III) chloride?
Answer:
38.3 g
Explanation:
8) What mass of chlorine reacts with 20.0 g of iron to form iron(III) chloride?
first write, then balance the equation
Fe + Cl2-------------> FeCl3
2Fe + 3Cl2----------> 2FeCl3
2 moles of Fe require 3 moles of Cl2
the atomic mass of Fe is 56
20/56= 0.36 moles of Fe
this requires o.36 X 3/2 = 0.54 moles of Cl2
Cl2 has a molar mass of 35.5 X 2=71
1 mole of Cl2 is 71g
0.54 moles is 0.54 X 71 g= 38.3 g
The mass of chlorine reacts with 20.0 g of iron to form iron(III) chloride is 38.3 g.
What is mass?Mass is defined as a numerical representation of the fundamental characteristic of all matter, inertia.
It can also be defined as a dimensionless number used to describe the mass of a particle or item.
[tex]\rm 2Fe + 3Cl_2\rightarrow2FeCl_3[/tex]
As per the reaction 3 mole of chlorine is required for 2 mole of fluorine.
Atomic mass of fluorine = 56
Moles of Fe = 20 / 56
= 0.36 moles
This require 0.36 x 3/2 = 0.54 moles of Cl₂
Molar mass of Cl = 35.5
So for Cl₂ = 2 x 35.5 = 71 moles
For 1 mole of Cl₂ = 71 moles is needed
So, for 0.54 moles = 71 x 0.54
= 38.3 g
Thus, the mass of chlorine reacts with 20.0 g of iron to form iron(III) chloride is 38.3 g.
To learn more about mass, refer to the link below:
https://brainly.com/question/19694949
#SPJ2
Nancy rides her bike 114.8 miles in 8.2 hours. What is her average speed in miles per hour
The answer to the question is 14 no cap
What is the concentration of chloride ions in solution after the reaction of 5.8 mL 0.12 M ammonium chloride with 3.2 mL 0.21 M silver nitrate
Answer:
ok
Explanation:
my sheesh hurts my sheesh hurtsmy sheesh hurtsmy sheesh hurtsmy sheesh hurtsmy sheesh hurtsmy sheesh hurtsmy sheesh hurtsmy sheesh hurtsmy sheesh hurtsmy sheesh hurtsmy sheesh hurtsmy sheesh hurtsmy sheesh hurtsmy sheesh hurtsmy sheesh hurts
Answer:
1
Explanation:
Answer:
Um.....
Explanation:
Thanks for the pts
✌️❤️✌️
aufbau principle
what is the meaning of the principle
Answer:
The meaning of this principle is building-up.
Explanation:
The Aufbau principle asserts that electrons occupy lower-energy atomic orbitals before filling higher-energy ones (Aufbau is German for "building-up") (Aufbau is German for "building-up"). By using this method, we may forecast the electron configurations for atoms or ions.
A piece of potato had an original mass of 3.2g and after being left in a sugar solution for 24 hours it then had a mass of 2.8g. Calculate the percentage mass decrease of the potato.
Answer: -13% to 3 sig figs
Explanation:
A piece of potato had an original mass of 3.2g and after being left in a sugar solution for 24 hours it then had a mass of 2.8g. Calculate the percentage mass decrease of the potato.
the change in mass is 2.8 -3.2 = -0.4 gm
the % change fro the origial piece is ( -0.4/3.2) X 100 = -12.5%
or -13% to 3 sig figs
which one is not allotropes of carbon?
Answer:
B. Activated Carbon
Explanation:
Which of these is the condensed structural formula for an alkane with four carbon
atoms?
O CH3CH2CH2CH3
H
HLH
1C
H
C2
LH
I
C
HTH Н
H
0-I
I
क
H
OCH3CHCHCH3
OC-C-C-C
Answer:
First option
Explanation:
The option that says CH3CH2CH2CH3 is the correct option (I hope that I am right because the order of the answers is not very clear :/)
Describe two or three ways in which the measurements you made could lead to errors in the results. Explain how each error would affect the answer of molar mass. In other words, would the molar mass go up or down and why
Answer:Physical and chemical laboratory experiments include three primary sources of error: systematic error, random error and human error
Explanation:
When examining the root mean square speed equation, we can see that the changes in temperature (T) and molar mass (M) affect the speed of the gas molecules. The speed of the molecules in a gas is proportional to the temperature and is inversely proportional to molar mass of the gas.
How many carbon (C) atoms are in C3Hg? A. 8 B. 5 C. 1 D. 3
Answer:
the answer is D
How many grams are contained in the quantity 0.34 mol Ca
Answer:
13.6272 Grams
Explanation:
Moles of Calcium × atomic weight = Grams
0.34 × 40.08 = 13.6272
0.34 Moles of Calcium = 13.6272 Grams
buna, am nevoie de un site de facut proiecte
Answer:
translation to English please
How do the elements beryllium, carbon, and oxygen produce stars such as the Sun?
Answer:
Beryllium, carbon, and oxygen do not create stars like the sun. The sun is a massive cluster of hydrogen atoms being fused into helium atoms and heavier metals like Beryllium, carbon, and oxygen through the process of nuclear fusion. The more mass a star has in its core the more fusions that can occur and the heavier the metals inside can be fused into.
Explanation:
hope this helps. . . <3
good luck! uωu
How many aluminum ions are present in 65.5 mL of 0.210 M All3solution?
Answer:
Aluminium ions present's in 65.5mL of 0.210
M All 3solution is Given below-:
Answer and Explanation: 1
The first step is to determine the moles of aluminum ions. This utilizes the volume, molar concentration, and subscripts from the chemical formula of aluminum (III) fluoride as shown.
65.5 mL×1 L1000 mL×0.210 mol AlF31 L×1 mol Al3+1 mol AlF3=0.013755 mol Al3+65.5 mL×1 L1000 mL×0.210 mol AlF31 L×1 mol Al3+1 mol AlF3=0.013755 mol Al3+
To calculate for the number of aluminum ions, we use Avogadro's number as shown.
0.013755 mol Al3+×6.022×1023 ions1 mol Al3+=8.28×1021 ions Al3+.
Itz the ans. of collage ok man.
Answer:
m0.013755
m
o
l
A
l
3
+
×
6.022
×
10
23
i
o
n
s
1
m
o
l
A
l
3
+
=
8.28
×
10
21
i
o
n
s
A
l
3
+
L
×
1
L
1000
m
L
×
0.210
m
o
l
A
l
F
3
1
L
×
1
m
o
l
A
l
3
+
1
Explanation:
The first step is to determine the moles of aluminum ions. This utilizes the volume, molar concentration, and subscripts from the chemical formula of aluminum (III) fluoride as shown.
65.5. To calculate for the number of aluminum ions, we use Avogadro's number as shown.
Is there a need for adhesives?
Answer:
yes
Explanation:
what would happen if the next time you needed tape or glue you remember, oh wait theres none at the house, thats just an example of why you would indeed need adhesives
Airflow through a long 0.2m square air conditioning duct maintained the outer duct surface temperature at 10degree.if the horizontal duct is uninsulated and exposed to air at 35degree in the crawl space beneath at home.
What is the heat gain per unit length of the duct.
Answer:
125°C/m
Explanation:
The difference in temperature will be:
35 - 10 = 25
The outer duct surface is heated 25°C by the air from 10°C to 35°C;
This heat gain is simply divided by 0.2m to get heat gain per unit length:
25/0.2 = 125
125°C/m
If you're American, this will be °F I believe, so the answer will be:
125°F/m
What is the expression for the equilibrium constant for the
reaction N2+ 3H2 = 2NH3?
Answer:
For the reaction N2 + 3H2 2NH3 , the equilibrium expression may be written as K [ NH3 ]^2/ [ N2 ] [ H2 ]^3 .
Explanation:
Answer:
s K [ NH3 ]^2/ [ N2 ] [ H2 ]^3 .
Explanation:
because I know -_-
Using this chemical stoichiometry, determine the number of moles of carbonic acid that can be produced from 2 mol NaHCO3 and 7 mol HCl.
Answer:
reaction is NaHCO3 + HCL = H2CO3 + NaCl
the ratios are 1:1
the 8 moles of HCl are in excess
so if you use 4 moles of NaHCO3 then you will obtain 4 moles of carbonic acid
hope that helps
Explanation: