(20 points) In the morning, you decide to make toasted bacon, lettuce, and tomato sandwich. Observe what happens in each stage of making the sandwich. Which parts involve only chemical changes happening?

I. The first thing you do is cut two slices of bread.
II. Then you put the slices in the toaster to cook. When the toaster is done, it pops the III. warm brown toast. You cook the bacon in a frying pan you put bacon, lettuce, and tomato on the bread, trimming the sides.
IV. You can smell the old bread in the garbage going moldy.

Steps I and II
Steps II and III
Steps II and IV
Steps III and IV

Answer:

[tex]\boxed {\boxed {\sf 1.6 \times 10^{24} \ atoms \ Si}}[/tex]

Explanation:

We are asked to find how many atoms are in a sample of 75 grams of silicon.

First, we must convert grams to moles using the molar mass. This is the mass of 1 mole of a substance. The molar mass is found on the Periodic Table because it is equal to the atomic mass, but the units are grams per mole instead of atomic mass units.

Look up the molar mass of silicon.

We convert using dimensional analysis, so we must set up a conversion factor.

[tex]\frac {28.085 \ g \ Si}{1 \ mol \ Si}[/tex]

We are converting 75 grams of silicon to moles, so we multiply by this value.

[tex]75 \ g \ Si*\frac {28.085 \ g \ Si}{1 \ mol \ Si}[/tex]

Flip the conversion factor so the units of grams of silicon cancel.

[tex]75 \ g \ Si*\frac {1 \ mol \ Si}{28.085 \ g \ Si}[/tex]

[tex]75 *\frac {1 \ mol \ Si}{28.085 }[/tex]

[tex]\frac {75}{28.085} \ mol \ Si[/tex]

[tex]2.670464661 \ mol \ Si[/tex]

Next, we convert moles to atoms using Avogadro's Number, or 6.022 ×10²³. This is the number of particles (atoms, molecules, formula units, etc.) in 1 mole of a substance. In this problem, the particles are atoms of silicon.

Set up another conversion factor, this time with Avogadro's Number.

[tex]\frac {6.022 \times 10^{23} \ atoms \ Si}{1 \ mol \ Si}[/tex]

Multiply by the number of moles we found.

[tex]2.670464661 \ mol \ Si*\frac {6.022 \times 10^{23} \ atoms \ Si}{1 \ mol \ Si}[/tex]

The units of moles of silicon cancel.

[tex]2.670464661 *\frac {6.022 \times 10^{23} \ atoms \ Si}{1 }[/tex]

[tex]2.670464661 * {6.022 \times 10^{23} \ atoms \ Si}[/tex]

[tex]1.60815382 \times 10^{24} \ atoms \ Si[/tex]

The original value of grams (75) has 2 significant figures, so our answer must have the same. For the number we found, that is the tenths place. The 0 in the hundredths place tells us to leave the 6 in the tenths place.

[tex]1.6 \times 10^{24} \ atoms \ Si[/tex]

Answer:

it doesn't house the sweat and oil glands

Explanation:

the epidermis doesn't house the oil and sweat glands but the dermis does

[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]

The atomic number of the shown element Al (Alluminium) is ~

Explanation:

atomic number = no. of protons = 13

therefore atomic number of aluminium is 13 as given

so option D 13 is correct option .

hope this answer helps you dear! take care

Explanation:

no sé de qué me estás hablando

This is a precipitation reaction and 1.38 g of the precipitate will be formed is the statement is correct. Hence, option C is correct.

A precipitation reaction is when two or more dissolved chemicals combine to form one solid products. The exchange of ions between ionic compounds in aqueous solutions is a common component of these reactions, which are also occasionally referred to as double displacement, double replacement, or metathesis reactions.

in response to precipitation a process that converts soluble salts into solids that are insoluble in water. a neutralizing response an interaction between an acid and a base that results in the production of salt, water, and an ionic molecule.

Precipitate refers to a solid that forms from a solution. The blending of two transparent solutions is a common example: NaCl in combination with silver nitrate The answer is. The soli cannot be dissolved in water.

Thus, option C is correct.

For more information about precipitation reaction, click here:

https://brainly.com/question/24158764

#SPJ2

Answer:

These are the nonmetals.

Answer:

337.5 g NaCl

Explanation:

.90% saline solution = 90g saline (NaCl)/100mL water (H2O)

1. Use 375 mL to find mass

375 mL × (90 g NaCl/100 mL) = 337.5 g NaCl in 375 mL .9% saline solution

The amount of sodium chloride dissolved in 375 ml of a 0.90% saline solution is 337.5 g.

The concentration can be calculated when we have the molecular formula and its molecular weight. The concentration of the solution is calculated as the weight of a solute divided by the volume of the solution.

The weight/volume percentage of the solution is determined in the following way.

W/v (%) = weight of the solute/Volume of the Solution ( in mL)

Given, the concentration of the saline solution = 0.90 %

0.90 % saline solution means 90 g of NaCl is dissolved in 100 ml of water.

Given, the volume of solution = 375 ml

100 ml of saline solution containing NaCl = 90 g

Then 375 ml of saline solution containing NaCl = 90 ×375/100 = 337.5 g

Therefore, the amount of NaCl is equal to 337.5 g.

Learn more about molar concentration, here:

brainly.com/question/21841645

#SPJ2

Answer:

one Sodium (Na) atom, two oxygen (O) atoms, two carbon (C) atoms, and three hydrogens (H) atoms

Explanation:

Answer:

Refer to the attachments!!

Explanation:

The alcohol content is 450 proof

In the given example, the measurement of the alcohol content is said to be measured in alcohol proof.

We are going to multiply the given proof of the alcohol with the vodka drink divided by 100 to determine the content of alcohol in the alcoholic beverage.

i.e.

= (750 × 60)/100 proof

= 450 proof

Learn more about measurement here:

https://brainly.com/question/2384956?referrer=searchResults

Answer:

chemical reaction

Explanation:

The chemical reaction produces chemical changes to provide energy. Chemical reactions often involve changes in energy due to the breaking and formation of bonds.

Answer:

using Charles law

v1/t1= v2/ t2

Explanation:

875/t1=955/56+273

t1= 329* 875/955

t1= 302.82k

The initial temperature of the hot air balloon can be calculated from Charles's law. The initial temperature of the balloon was, 51.3 °C.

According Charles's law, at constant pressure, the temperature and volume of a gas is in direct proportionality. Thus volume increases with an increase in temperature. Therefore V/T = a constant.

Let V₁ and T₁ be the initial volume and initial temperature and V₂ and T₂ be the final volume and temperature respectively. Thus we can write the relation as:

V₁ /T₁  = V₂/T₂ .

Given that the initial and final volume are 875 L and 955 L respectively. The final temperature is 56 °C. Thus the initial temperature is calculated as :

T₁ = V₁T₂/V₂

   = (875 L × 56 °C )/955 L

   = 51.3 °C.

Hence, the initial temperature of the hot air balloon was 51.3 °C.

To find more on Charles's law, refer here:

https://brainly.com/question/16927784

#SPJ5

This problem is asking for the consumption of silver ions when silver nitrate is reacted with copper. In such a case, since no masses are given, we can use the following from similar problems:

Mass of empty beaker: 110.000 g

Mass of beaker with silver nitrate (after all additions) and copper: 331.634 g.

Mass of beaker with silver: 113.395 g.

This means we can write the following chemical equation:

[tex]Cu+2AgNO_3\rightarrow Cu(NO_3)_2+2Ag[/tex]

And thus calculate the mass of silver nitrate that will produce the following mass of silver:

[tex]m_{Ag}^{produced}=113.395g-110.000g=3.395g[/tex]

Next, we use the 2:2 mole ratio of silver to silver nitrate (silver ions source):

[tex]3.395gAg*\frac{1molAg}{107.87gAg}*\frac{2molAgNO_3}{2molAg} *\frac{169.87gAgNO_3}{1molAgNO_3} = 5.35gAgNO_3[/tex]

The step will be defined for the given mass of available silver nitrate which will be compared to 5.35 g (consumed mass) to see if they are the same (all consumed) or different (partial consumption).

Learn more:

Answer:

D

Explanation:

Answer:

for plato users, the answer is: give the plant structure and support

Answer:

cpd 2

Explanation:

aldehyde is such a cpd which contains an alkyle gp with the formula R-CH=O

Functional group can be interconverted into each other by the means of suitable reagent. Functional group are responsible for the chemical and physical properties of a compound. Therefore the correct option is option 2 that is having group  R-CHO.

A group of atoms forming a component of a molecule that accounts for a particular function or chemical behavior is called a functional group. There are so many functional group in organic chemistry.

The list of functional groups with their corresponding formulas can be given as

Carboxylic group COOH

Alcoholic group OH

Ammine group NH₂

Ketonic group R-CO_R

Aldehydic group R-CHO

Thiol group R-S-H

Cyanide group -CN

Therefore the correct option is option 2 that is having group  R-CHO.

To know more about functional group, here:

https://brainly.com/question/14618322

#SPJ2

The best way to balancing a combustion equation of an organic compound, like the one in the question, is to start balancing the carbon, then the hydrogen and finish with the oxygen. For that you have to split the hydrocarbon into individual elements. And once you have finished you shall always try to reduce the coefficient if possible. Therefore, the answers are A. and C.

The pressure of hydrogen gas produced is 0.997 atm

Using the standard table of temperature and water vapour pressure;

Recall that:

[tex]\mathbf{P_{moist \ gas} = P_{dry \ gas} + P_{water vapor}}[/tex]

where;

[tex]\mathbf{ P_{dry \ gas} = P_{moist \ gas} - P_{water vapor}}[/tex]

[tex]\mathbf{ P_{dry \ gas} = (786- 28.3) mmHg}}[/tex]

[tex]\mathbf{ P_{dry \ gas} = (757.7) mmHg}}[/tex]

We know that 1 atmospheric pressure = 760 mmHg

∴

757.7 mmHg will be:

[tex]\mathbf{=\dfrac{757.7 \ mmHg \times 1 \ atm}{760 \ mmHg}}[/tex]

= 0.997 atm

Therefore, we can conclude that the pressure of hydrogen gas produced is 0.997 atm

Learn more about partial pressure here;

https://brainly.com/question/14281129?referrer=searchResults

Answer:

more heat

Explanation:

more heat bro , more heat

Explanation:

The answer is given in the question

Answer:

Before we can sketch the Lewis structures of molecules, we must first understand the octet rule. The octet rule asserts that when atoms combine to create compounds, electrons are gained, lost, or shared among them, resulting in a stable electron configuration defined by eight valence electrons as a result. These rules are used in conjunction with the main-group components of the second period.

Explanation:

Hope it helps:)

Answer:

Physical Change

Explanation:

A solid being crushed into a powder is a physical change because a chemical change is when substances combine to create new substances.

Hope this helps :)

Answer:

-O CH30

Explanation:

My Head Is About To Explode

Answer:

10

Explanation:

Basically same as last question but the number is before the compound :)

[tex]\boxed{\sf °F=\dfrac{9}{5}°C+32}[/tex]

[tex]\\ \sf\longmapsto °F=\dfrac{9}{5}(197)+32[/tex]

[tex]\\ \sf\longmapsto °F=\dfrac{1773}{5}+32[/tex]

[tex]\\ \sf\longmapsto °F=354.6+32[/tex]

[tex]\\ \sf\longmapsto °F=386.6°F[/tex]

[tex]\rule{200pt}{5pt}[/tex]

[tex]\boxed{\sf K=°C+273}[/tex]

[tex]\\ \sf\longmapsto K=197+273[/tex]

[tex]\\ \sf\longmapsto K=470K[/tex]

Answer:

i) In thee mitochondrion, pyruvate carboxylase converts pyruvate to oxloacetate.

ii) Malate dehydrogenase in the mitochondrion reduces oxaloacete to to malate.

iii) Malate dehydrogenase in the cytoplasm oxidizes malate to oxaloacetate.

iv) Phosphoenolpyruvate carboxykinase decarboxylates and phosphorylates oxaloacetate.forming phosphoenolpyruvate.  

Explanation:

Gluconeogenesis is the synthesis of glucose from non - carbohydrate compounds. The substrates for gluconeogenesis are lactate, pyruvate, amino acids, propionate and glycerol.

Gluconeogenesis occurs only in cytosol but the precursor is produced in mitochondria. In the conversion of pyruvte to phosphoenolpyruvate occur in mitochondria and cytosol.

Step -1:

Pyruvate carboxylase is a biotin dependent enzyme located in mitochondria. It converts pyruvate to oxlaoacetate and carbondioxide in the presence of ATP.Oxlaocetate synthesized in mitochondrial matrix has to be transported to cytosol for gluconeogenesis. Oxaloacetate is impermeble, cannot be sent out of mitochondria. So it has to be converted to malate.

Step -2:

Malate dehydrogenase in mitochondria converts oxaloacetate synthesized in mitochondrial matrix to malate. And then  it is transported to cytosol.

Step 3:

Malate dehydrogenase responsible for reversible reaction in cytosol converts malate to oxaloacetate.

Step -4

Phosphoenolpyruvate carboxy-kinase in cytosol converts oxaloacetate to PEP. The enzyme transfer high energy phosphate bond from GTP to oxaloacetate to from PEP and liberated carbondioxide.

Therefore, the steps of glycolysis converts phosphoenolpyruvate to pyruvate are as follows.

i) In thee mitochondrion, pyruvate carboxylase converts pyruvate to oxloacetate.

ii) Malate dehydrogenase in the mitochondrion reduces oxaloacete to to malate.

iii) Malate dehydrogenase in the cytoplasm oxidizes malate to oxaloacetate.

iv) Phosphoenolpyruvate carboxykinase decarboxylates and phosphorylates oxaloacetate.forming phosphoenolpyruvate.

Explanation:

Thermal Energy is directly proportional to the temperature

Or

[tex]\\ \sf\longmapsto Thermal\: Energy\propto Temperature [/tex]

So if temperature increases the thermal Energy also increases.

An object which is 20°C warmer than other has more thermal energy

Answer:

385 cm^3

Explanation:

375cm3 of a gas has a pressure of 770 mm Hg, find it Volume if the pressure is reduced to 750 mm Hg

​if we reduce the pressure, the volume increase since since PV is constant

so the new volume = 0.375 cm^3 X 770/750 = 385 cm^3

63